Grammetry Print Calibrator STL

Congratulations on purchasing the Printer Calibration model. Now let’s get you the appropriate STL file.

Now that you have purchased the 3D Printer Calibration model you need to download the appropriate STL file to print. Here are the directions:

Directions

• Print the STL file, and seat on stone Printer Calibration model.
• If the printed STL does not passively seat then contact your 3D printer company for further printer calibration steps.
• We recommend that you periodically repeat the above steps to check the calibration of your 3D printer.

Bar STL Files

• DESS 19.018
• Dan Rosen 1.4mm
• Dan Rosen 1.6mm
• Dan Rosen 1.72mm
• Vortex LA VIS
• SIN Screw (This file is the same STL as DESS 19.018 above)