Skip to content
  • There are no suggestions because the search field is empty.

What are the Bespoke Characterization options, and which full-arch finals can use them?

Bespoke Characterization is a set of esthetic options, not a material or a product. You choose the full-arch final, then add your characterization choices to the same full-arch Rx. The options are included at no charge.

Esthetic customization options

These are the six selectable categories.

Category

Options available

What it controls

Tooth shape (smile model)

Patient photo, study model, or one of 11 Bespoke smile models

Starting tooth shape and arrangement, including cuspid character and incisal corner form

Base tooth shade

19 VITA shades

The foundation color of the dentition

Shade intensity

3 levels (Light, Medium, Pronounced)

Cervical, interproximal, and incisal pigmentation depth

Tooth texture

3 levels (Light, Medium, Pronounced)

Mamelons, perikymata, and surface irregularity

Gingival hue

6 hues

Tissue color across population types

Gingival texture

3 levels (Light, Medium, Pronounced)

Stippling, root structure, frenum, cervical character

The 19 base VITA shades available are: 0M1, 0M2, 0M3, A1, A2, A3, A3.5, A4, B1, B2, B3, B4, C1, C2, C3, C4, D2, D3, D4.

The 6 gingival hues are: Light pink, Medium pink, Deep pink, Light purple-pink, Medium purple-pink, Deep purple-pink.

Adding the 11 smile models, 19 shades, 3 intensity levels, 3 tooth textures, 6 hues, and 3 gingival textures gives 45 choices. That is where "40+ points of customization" comes from.

Note on translucency: Translucency is not one of the selectable options. If you have a translucency preference, write it in the Rx instructions or ask ROE to discuss it with you.

Full-arch finals that can use the options

ROE's fixed full-arch finals are organized by material and function: Graphenano, Zirconia, and Reinforced Zirconia. Bespoke Characterization can be added to any of them.

Family

ROE final

Core material

Prosthetic design

Notes

Graphenano

G-CAM Graphenano

Graphene-nanoreinforced biopolymer G-CAM disc on a milled fiber-composite or titanium bar

FP1 / FP2 / FP3

Lighter and less abrasive than zirconia; not for heavy bruxers

Zirconia

TLZ-IB Zirconia, with or without Ti bases

Full zirconia, MiYO liquid porcelain, titanium cylinders when Ti bases are used

FP1 / FP2 / FP3

Without Ti bases: Nobel-compatible MUA only

Zirconia

NobelProcera Zirconia

DOCERAM Nacera Pearl Zirconia, MiYO liquid porcelain

FP1 / FP2 / FP3

Nobel-compatible MUA only; no-coping design

Reinforced Zirconia

TLZ-IB with Metal Substructure

Zirconia with MiYO liquid porcelain over a milled titanium substructure

FP3

For cases that need extra strength or have limited vertical space

Vertical space and design requirements

Vertical space is the specification most likely to change your material decision, so confirm it early in planning. The requirement belongs to the final you choose. Characterization does not change it.

Final

Vertical space requirement

Graphenano

15 mm minimum. Zirconia is generally required below 15 mm.

Zirconia

10 mm minimum. Below 10 mm, contact ROE to review alternatives before submitting.

Reinforced Zirconia

Used for FP3 cases with less than 10 mm. ROE will call to verify space requirements.

Bite class (I, II, or III), any tooth numbers to omit, and the gingival transition design are part of the full-arch final itself. They are not Bespoke Characterization options, so record them on the full-arch Rx alongside your selections.

Turnaround

Characterization options are added to a standard full-arch case. Plan against the lab days for the final you chose with ROE's Case Delivery Calculator. Expedite service is available and fees apply.

Additional Resources

For more information on Bespoke Characterization:

Contact Information

For help choosing Bespoke Characterization options for your next full-arch case, contact ROE Dental Laboratory: