What if the angle implants, MUA’s and Temp cylinders are not aligning through the holes?

Verify that the implants are in the correct position. This can be observed visually through the carrier guide. If looks good, then the angled implants may be inserted in the wrong rotation. If it is, then the implant must be rotated, as little as just a few degrees. This should ‘right’ the MUA and Temp Cylinder. Also, verify that the abutment screw is in line with the black square on the Carrier Guide. This square is where the driver passes through to deliver the abutment screw, in the same trajectory as the implants. If the implant has been place with the correct indexing to the hex on the Osteotomy Guide, then the MUA may need to be remove and placed in one rotation clockwise or counterclockwise. Best course of action is to follow the implant guided kit to deliver the implant exactly as the Hex indicates.